The jungle book

Broadband connection can be stabilized by these means

Nothing is more annoying than a shaky Wi-Fi connection, given how much our lives are connected to the internet. Virtually every aspect of our lives, including business and leisure, can be affected by slow Internet speeds. More often than not, individuals blame Internet Service Providers for connection latency. While this may be the case, it’s important to ensure that every device on your network is able to use every byte of available bandwidth. Improperly configured Wi-Fi can present a considerable challenge. Here are some solutions for a slow Wi-Fi connection.

Common Causes of Wi-Fi Connection Fluctuations

Let’s look at some typical causes of erratic Wi-Fi behavior first. One of the most common reasons for poor Wi-Fi is that when you’re lounging on the couch you can get fantastic speed, but when you go to the balcony, the connection drops considerably. Your speed decreases the further you get from the Wi-Fi router. Another factor is barriers, which can slow things down. Examples include thick, impermeable concrete walls, wooden walls, metal blinds, etc. Since Wi-Fi signals are transmitted on the same frequency bands as most devices, interference must also be taken into account. In densely populated residential and commercial areas with many routers distributed in neighboring buildings, conflicting frequencies are frequently observed. It could be tampered with by your neighbours’ Wi-Fi.

Similar to devices without a protective layer, unshielded USB 3.0 cables are unable to block wireless interference from outside sources. Your low internet speed could also be the result of an outdated Wi-Fi router with outdated hardware. Excessive bandwidth usage and wear and tear on the coaxial cable or fiber connection entering your home can potentially cause problems.

How to Control Wi-Fi Fluctuations

Restarting your router is one of the most popular ways to improve Wi-Fi performance. Although you shouldn’t do this frequently, you can restart the router if your internet speed is extremely low. It is best to position the Wi-Fi router in the center of the house so that all Wi-Fi devices have equal access to it to alleviate the problem of erratic access in different parts of the house. It can help to some extent if you try to place it in an open area without a lot of wall obstructions. Using a repeater, you can also extend the Wi-Fi range. As signal amplifiers, they are. To reduce the strain on your Wi-Fi, it is advisable to connect wireless devices such as laptops to Wi-Fi while using wired connections for stationary devices such as desktop computers and televisions.

Most of the time, we can have unauthorized devices connecting to Wi-Fi. To illustrate, you might have a hidden second tablet or an old phone that is only used for calls. You can remove these devices from your network. Checking the list of devices connected to your Wi-Fi by going to the admin section of your router is a quick fix. Remove any devices you no longer use or recognize from the list. Your router’s built-in traffic analyzer may be able to show you which devices are using the most data. To improve the performance of your router, remember to update the firmware when visiting the administrator settings.